and an art worth your learning.."
Presented from Issue 112, October 2014
So said Izaak Walton in the 1600s. It seems that Burnie’s Hannah Ledger has combined angling with art rather well. Hannah is a fish fanatic, outdoor enthusiast and budding, self-taught artist. From as young as she can remember, she has always had crayon in hand, colouring book under arm and as she’s grown as a painter, jars full of paintbrushes and cupboards full of ready-to-go blank canvas’.
A country girl at heart, Hannah was schooled at Yolla District High School, a small ‘farm’ school in the states North West, then went on to Hellyer College where she was given the opportunity to really grow her art skills; And by grow, that meant skipping the classes that would probably have more an impact of getting her somewhere in life, like English and Math to spend every spare minute with the art teacher, painting or drawing.
As typical teenagers do, they make poor decisions- and after being accepted in to one of the countries top art schools, turned down the offer and decided to move to the big island, where she lived for 5 years working in what seemed ‘dead end’ retail.Read more ...
Presented from Issue 116, June 2015
Winter is a great time for tackle tinkering… Reel maintenance, fly tying, replacing the rusty trebles on lures, or even pimping up your soft plastics for the coming season! As Starlo explains, customising the colours of your plastics isn’t hard. It’s also great fun, and can be highly effective!
In this occasional series of features, I want to look at the fascinating subject of customising soft plastic lures. In my opinion, this is an avenue of tackle tinkering that far too few anglers explore. Most buy their supplies of soft plastics from the tackle store and seem to assume that these versatile lures must be used in exactly the form they were packaged in by the manufacturer. In reality, nothing could be further from the truth!
Perhaps this notion that the maker knows best and that anglers shouldn’t “fiddle” with their products is a carry over from the world of hard-bodied luring. Beyond perhaps upgrading or replacing hooks and rings, very few anglers actively modify hard-bodied lures made from metal, plastic or timber. There are exceptions to this rule, of course. For example, some switched-on trout chasers have been adding bright, pea-sized red spots with lighter-coloured halos to their minnows, plugs and spoons for years, especially when fishing the pre-spawn and post-spawn runs of trout in autumn and spring. I first helped to popularize this custom colouration more than three decades ago, and gave it the name “spotted dog” in my writings. That label has stuck, and has even been picked up by some commercial lure makers. But I certainly can’t claim to have “invented” the actual spotted dog pattern. In fact, it was first shown to me by a very canny Finnish trout fisher named Erkki Norell in the early 1980s, and it had been used in his home country (with great success) for at least a generation or two prior to him telling me about it. There is very little under the sun that is truly “new”!
Presented from Issue 115, April 2015
While the action on the saltwater has been okay, the Tasmanian trout season has been far from great. Over the summer, I have fished many of the highland lakes, using both dry fly and micro-sized plastics. Although some of my trips have been productive, there have been many trips where I have put in long hours and plenty of effort, for only a few fish. It is with particular sadness, that Arthurs Lake - my favourite place to fish, has also let me down on a number of occasions. As with any fishing trip, I always endeavour to find a ‘silver lining’, and for me it has been that the few fish I have caught were noticeably larger, and in better condition, than the ones I caught the previous year.
Presented from Issue 115, April 2015
Lots of anglers seem to be deeply challenged when it comes to selecting that first soft plastic to tie on at a new location, or even to start a new day’s fishing at a well-known spot. In this feature I want to share with you some basic rules of thumb that will greatly ease the burden of this important decision making process:
Over the course of a year, I get to talk to a lot of soft plastics fishers from around the country. Some I meet at seminars and shows. Others I chat with via the various pages on Facebook that I run or help to administer (especially the StarloFishing and Squidgy Soft Plastics pages), or through my blogs on www.starlofishing.com Still others send their letters or emails to me via the various magazines I write for. However, no matter what the source of the enquiry, one question (or variations of it) dominates the calls for advice that I receive. Typically, that query begins with the words: “What’s the best soft plastic to use for…?”
Presented from Issue 114, February 2015
Crafting something with your own hands can be incredibly fulfilling. I have a trade background as a fitter, machinist and toolmaker and have made many things from metal, timber and other things over many years.
Some time ago I thought I would build a small drift boat and searched the internet for some plans. There are hundreds of plans online from free to a few hundred dollars. Like most things in life it is wise to spend enough to get what you need.
Drift boats are most common in the USA and used there mostly for floating downstream on rivers. The design is characterized by a wide, flat bottom, flared sides, a narrow, flat bow, and a pointed stern. A rocker is designed into the bottom along an arc from bow to stern of the boat. They are sort of back to front and can be rowed either way depending on the situation and speed of water. Drift boats have a very shallow draft and are very easily manoeuvred, spun around and held in fast water.
Drift boats have become more popular in recent times in Tasmania and we have many waters for which this style of boat is ideal. At least a three guides now use them and a few locals have either built or imported different styles.
Many pictures are at the end of the article.
Please click here or on the image for a full size form
Presented from Issue 111, August 2014
By the end of the brown trout season I’m usually ready for a change, try to catch a tuna, stock up on some flathead or garfish. But by the first weekend in August I am refreshed and ready to go again. Early season is a great time of year in Tasmanian lakes, high water levels with cruising browns in shallow water, wet fly polaroiding, fishing with sinking lines to get to weed beds where the fish are holding and feeding, all great ways to catch an early season fish.
We all have our favourite flies and some great early season patterns. These are a few I like to fish early in the season.
Presented from Issue 111, August 2014
Anti-kinks are a unique piece of inexpensive tackle. They can be very useful used correctly. By definition they are design to stop your line twisting and developing ‘kinks’ which are the result of line twist.
As a rule I tend to go by the KISS principal. Keep It Simple Stupid. That is to have as little clutter as possible on my line at all times. Line tied directly to the lure or snap and that’s it. But there are times when it is necessary to use an anti-kink.
There are several different types, mostly plastic for want of a better word, although there are weighted lead, aluminium and brass version floating around but these tend to be older styles. All are designed to act as a keel and track straight through the water. All are shaped like a semi-circle or half-moon probably the best description.
Presented from Issue 111, August 2014
If you’re anything like me, your tackle box is overflowing with various trout lures that you have hardly used. I insist on keeping them however, just in case ‘the right time’ happens. However, realistically it is pretty much the same six lures that get tied on every trout season, simply because I have the most confidence in them. This confidence has come from years of these lures constantly producing good results; it is not easy for a lure to make the cut at being one of the six. There are so many good trout lures on the market today, lures that grab your eye as soon as you walk along the lure wall, however these six lures don’t just catch fisherman, they catch trout.
Monday 11 September the Australian Senate voted to approve the Product Emissions Standards Bill.
The Rules (Regulations) are being drafted and Industry has a further meeting with the Environment Department tomorrow.
The Rules are planned to commence next year, with the final imports of high emission outboards and mowers on 30 June 2018. Wholesalers and Dealers will then have a year to sell off old stock. All of this was announced in January – giving Industry 30 months clear notice – though regulations in general were in process since 2015.
Presented from Issue 106, October 2013
Epic rod build I had been tossing it up for a while; it is after all a big decision. Will I or will I not build my own fly rod? There are quite a lot of things to consider when you want to head down the path that is building your own rods of any type. The first thing that came to mind for me was, is it really worth doing. It is just so easy to walk into your local tackle store have a cast of the rod you are interested in, make the purchase and walk out the door again safe in the knowledge that you have an exceptionally well finished off rod with all the factory rod warranty trimmings to boot.
Click above for current issue content. The current issue of TFBN is extensive and topical. In Tackle Stores, Newsagents and by subscription.
Delivered to your door for $60 for 2 years (10 issues). To subscribe, send Mike $60 via www.paypal.com.au . (Basic instructions are here) The email is at Contact Us. Your address will be included from PayPal. Please ensure your details are correct, for Mike to organise delivery.
Here is a list of all of the Article Categories. The number in Brackets, eg (13) is the number of articles. Click on Derwent River and all articles relating to the Derwent will be displayed in the central area.
Hello everyone, I thought it would be a good time to introduce myself.
My name is Stephen Smith and I have been managing the website tasfish.com since May 2009.
It has been an epic journey of learning and discovery and I am indebted to Mike Stevens for his help, support and patience.
I am developing a new venture Rubicon Web and Technology Training ( www.rwtt.com.au ). The focus is two part, to develop websites for individuals and small business and to train people to effectively use technology in their everyday lives.
Please contact me via www.rwtt.com.au/contact-me/ for further information - Stephen Smith.
Presented from Issue 100
Considering the world class quality of our sea trout fishery, these fish are not sought after by enough anglers. Sea runners live in the salt water and run up our estuaries and rivers from the start of August to the middle of November. At this time of the year, they are here to eat the many species of fish that are either running up the rivers to spawn or are living in and around the estuary systems. Trout, both sea run and resident (Slob Trout) feed heavily on these small fish which darken in colouration as they move further into fresh water reaches.
The majority of these predatory fish are brown trout with rainbows making up a very small percentage of the catch. They can be found all around the state but it would be fair to say that the east coast is the least prolific of all the areas. They still run up such rivers as the Georges (and many others) but their numbers along with the quality of the fishing elsewhere make it difficult to recommend the area above the larger northern, southern and western rivers.Read more ...